Monday, 30 July 2012

Well, I haven't blogged here for a while... here we go!
The engine you can see in the header photo has been causing me to think and the only way I'm going to get over its problem is to make my own carburettor. I've designed and manufactured a twin choke type to feed each cylinder individually. I had thought about a Plenum chamber, but the mixture will still be the same ratio for both cylinders ie. too rich for one and too lean for the other. Hopefully this will be the solution.
View on top/front
It'll fit onto the back of the engine mount, on top of the engine, hence the lug at the bottom.

No comments: